Something about walls

In the corners of the walls nail shaped rods, whose length is equal to the height of the walls. Reiki is a segment in the fourth round and are designed to provide the desired tension fabric. Upper and lower plates, as well as angular slats after the completion of scraps of fabric, cover or decorative baguettes. Attach these items by using a special adhesive.

In that case, when the stud wall outlet is located, we can proceed in two ways. If the outlet or switch is walled in a wall, then during the nesting panels cut to the right place at the hole, just the appropriate size socket. In this case, the measurement should be carried out very carefully, because unlike Wallpaper remaining free space around the unit will be virtually impossible to disguise. If the switch (or outlet) removable, it must be unscrewed and removed from the wall. You can do this only after you disconnect the house, turning off the tube. After this, apply a cloth on the wall and mark with chalk outlines of future openings. Then it must be neatly cut. Outlet or switch attach only after we've finished work on the upholstery of the room.

In order to improve sound and heat insulation, a fabric can nail down the lining of felt. Mounted it in the same way as any other matter. The distance from the ceiling, floor, doors, windows, outlets and switches to the edge of the felt pads should be 1-2 cm

There is a more complex technique of upholstery fabric rooms. If the previous version was performed by mounting bracket, then this method of material stuffed in the bracket. This will ensure proper ventilation of the space between the fabric and the wall and will prevent the matter from excessive moisture.

To strengthen the fabric in this way, pick up the first bracket. Their width should be equal to 5 - 7 cm, thickness - 1 cm slats fastened to the wall with nails or screws. Previously in concrete or brick wall, drill holes for screws. Straps fastened horizontally (from the floor, ceiling, door lintel and window frames) and vertically (in the corners and at intervals of 50 - 60 cm across the surface of the wall). Between the upper ceiling and the ceiling and between the bottom rail and the floor, leave a distance of 2 - 3 mm, so that you can bend the fabric and hide it bleeds.

Trim start at any corner of the room from the ceiling. Strengthen the fabric can tack or staple furniture. Stitched and well-ironed piece of cloth stuffed roughly to the upper plate. It is necessary to leave 2 - 3 cm of loose, then to bend under the bar. Stretch fabric quite strongly, but make sure that there was no danger of rupture. Then check the vertical arrangement of matter with a plumb. Once again, check how well is the fabric, and nail it on top and bottom. Drop 2 - 3 cm for the entry under the bottom rail. If suddenly formed a fold gently disengage the fabric and pull it aside. Wrinkles will disappear. Do not make too big or too small distance between the fasteners. The optimal interval - 5-10 cm After all the walls are upholstered with a screwdriver tuck strips of material left at the top and bottom plates.

If upholster the same cloth that was used to decorate the walls, and even furniture (chairs, stools, sofas, ottomans), the room will get extra volume. A combination of fabric and stucco will make a luxurious interior room, will give him the look of the apartments of the royal palace.

Another method of upholstery - Carriages screed. This method gets its name from the fact that before the so-decorated carriages of dignitaries. Material used in this case - leather or thick fabric. Not recommended Karetnaya screed for such delicate fabrics like silk or taffeta. The principle is this trim. Pasted on a wall layer of soft sound and heat insulating material (can also be used latex or polyurethane foam). Then a piece of paper you need to sketch and calculate the right amount of material. The length of the panels should be such that the fabric a little thing under the plinth and the upper cut into 2 - 3 cm was below the closing walls and ceiling. Karetnaya coupler can form images on walls in the form of diamonds or squares. It depends on the direction of fastening strips: diagonally or horizontally and vertically. Fastening strips can be made from the same material as for the main background, or use contrasting color or texture. After the calculated number of fixing strip (it depends on wall height, frequency and direction of attachment), begin marking material. On the surface of the tissue or skin is applied to the risks of driving a nail places alleged. Keep in mind that it is necessary to calculate very precisely: to remove from the fabric surface piercings you do not succeed. Once all the marking of work will be done, you can start lining of the walls. This is best done alone. To facilitate the work of the upper edge of the cloth can be glued to the wall. Then the fabric impose fixing the line and the marked locations pierce nails. To upholstery looked spectacular, use nails with decorative heads. As a result, you should get a wall with several prominent diamonds or squares. The degree of relief depends on the amount of soundproofing material, pasted on the wall.

That the room was a stylistic perfection, stud with the same material and upholstered furniture. It is best to use this method Karetnaya ties.

Another way of fixing tissues - on the profile of the flexible PVC. This method is the fact that the plastic frame allows you to mount the frame of any shape. Behind him you can hide a variety of pipes, radiators, corners. Profile is able to keep any fabric (silk, velvet, cotton, jacquard, polyester), and even the skin. The cost of such a framework is quite high, but it's worth it.

If you decide to mount the fabric on PVC profile, as would be the best drapery fabric of polyester. Linen material produced in widths from 3 to 5 meters in height blade to be slightly greater than the height of the walls. Polyester fabric high-pressure impregnated with polyurethane, which gives the material extra strength and density. The texture of the polyester fiber is similar to the texture of the canvas. On such a surface can be painted with acrylic paints. Cloth inserted in PVC frame, no slack. The fabric does not fade in the sun, will not crack (unlike many other synthetic fabrics). In addition, the coating does not attracts dust, but it can be cleaned with a vacuum cleaner. Polyester fabric has good sound insulation, which allows lower level of noise pollution in the apartment. In the material two drawbacks: high cost and complexity of assembly design (own tissue to fill in the box you will not be very easy). Frame mount virtually irreplaceable, if you want to drape a niche opening or protrusion.

The simplest way of fixing the matter on the wall - Velcro. To this end, the wall stick a piece of tape (usually with "loops") and the second sewn onto the fabric (with "hooks"). The fabric can be easily removed from the walls and just as easy to attach it back.

Mounted on clips easier than on a skeleton or interior. This method is similar to that used during installation of suspended ceilings. Along the perimeter of the room is attached a plastic profile. The ends of the blade snapped in the corners. After you have performed validation of his position and stabilize the rest of the tissue. Matter slip a spatula under the profile and reinforce it.

Coloring and texture of the matter should be chosen depending on destination and size of the room, style, interior, furniture and color scheme throughout the apartment. Figure tissue should be selected taking into account the fact that part-time room will be covered by an artificial light source (it changes the perception of color and light falling from above, can create the illusion of changing the aspect ratio), the figure will be visible over a large area, it should be combined with furniture and paintings or pictures hanging on the walls.

When choosing fabric, attach it to a piece of the wall, and went a little farther back, to see how it will look. To trim a large living room, you can use thin, delicate fabrics: taffeta or silk. If the room has a small area, its walls can be decorated with wool or satin in small patterns. This same fabric is upholster or furniture. Then the room will find a stylistic perfection and it will seem more comfortable. The walls are covered with gray and pearl matter, give a beautiful combination of dark cherry, dark blue or olive upholstered furniture.

The fabric is well hides cracks in the walls. There is no need plastering the surface and create cavities for electrical wiring - all this will mask the matter. If the neighbors above you are flooded, then any problems with the repair does not occur: a section stained cover carefully removed from the wall, washed, dried, and nailed into place. Do not forget to iron the cloth upholstery. In addition, the material much more durable wallpaper: tear it harder, and less spoiled. And if a family has a cat, you can choose wall coverings firmer fabric that will not break under its claws (wallpaper, which can not hurt the cat simply does not exist). Special fabric care is not required, but it is annoying, as claimed by psychologists, are much less likely than any other cover. Reduce spending on the cladding can be saved on the plastering.

The obvious advantage of tissue coverage is the fact that his colors more varied than the wallpaper, but the texture can be matched with your interior. The disadvantage of covering that material quickly absorbs odors, so you should not use it in kitchens and smoking areas.

During the cladding closely monitor the temperature regime (at least 15 ° C) and humidity (no more than 80%). In addition, the room should not be a draft. Clay, use only the one indicated in the instructions. Otherwise, the fabric may appear spots, stains, and self-fixing will not endure. If the wall is concave in places and this deficiency is not corrected, then choose the fabric without stripes that accentuate surface roughness. Plastic fastening elements used for fixing the fabric at the windows and doors, after work you can paste over the same cloth. This will make the corner less noticeable. It must be remembered that when worn on the wall of various lamps and paintings holes left due to incorrect marking the wall under the dowels, disguise is virtually impossible. Therefore vymeryayte their location as thoroughly as possible. Before drilling the walls of an incision in the fabric criss-cross in the center of the alleged holes, and during the operation, use dust extraction. This will prevent the ingress of dust into the space between the coating and the wall. Sockets and switches are best placed flush.

If you want to decorate fabric with embroidery, it is possible to order the work of professionals. Figure can be anything. It all depends on your desires and financial capabilities. A decorative draped panel on the wall can be identified with stucco, which protrudes from beneath the fabric. This piece will resemble the interiors of palaces.