About wallpapers

Another type of vinyl wallpaper - foam. The surface of such material is soft, slightly rough, often with sequins. In the foam vinyl is one significant minus - it is very fragile and susceptible to abrasion. But this is offset by the fact that the material is very well hide all the shortcomings of uneven walls and specifically to align the surface to be glued on this type of wallpaper is not necessary. The basis of foamed wallpaper is usually treated with various antifungal compounds. This material can be cleaned with a damp sponge or cloth.

Analog foamed vinyl wallpaper are acrylic. They are obtained by applying the emulsion on a paper basis, which then foams under high temperature. It should be borne in mind that these wallpapers less wear-and water-resistant than vinyl. Adhesively bonded to the same them on the same technology.

In addition to screen printing and foamed vinyl produces heavy and solid wallpaper. The first variety is very resistant to moisture. Produce even a special wallpaper for bathrooms and kitchens. Layer of vinyl in this material is thicker, wider rolls of standard - 70 cm

Solid vinyl wallpaper have high strength and resistance to abrasion, they do not fade in the sun. The texture of this material may be very diverse: from imitation paper wallpaper to tiles and natural stone. Pasting these wallpapers can only be completely flat surface. Figure does not require special fitting: repetitions occur through 64-100 see the glue is applied and on the wallpaper and the wall (the layer must be thick enough). Presses the material to the walls of a special rubber roller.

Must take responsibility for the choice of glue for wallpaper. It is best to use the structure that is right for this type of coverage: for the non-woven and paper materials the same composition is not suitable.

Typically, the adhesive sold in packages in a dry form. To bring it into working condition, it must be dissolved in water. To do this, pour a bucket of water required by the mixer (you can use any clean stick or scrap boards) create a small whirlpool, into which pour a thin stream of glue. The composition must be left until the swelling.

After maturation of glue it is thoroughly mixed, breaking up lumps. As a result, you must obtain a homogeneous mass. If it still remained small chunks, then you can remove them, strain through a sieve or glue the folded in two layers of gauze. On the quality of the glue depends on how well the wallpaper will stick.

Another option of finishing materials, suitable for the walls of kitchens, bathrooms and hallways - is self-adhesive wallpaper. With their help, you can not only decorate the walls, but also door and window jambs and furniture. This type of coverage allows you to arrange a room in a unified style without too much trouble. The length of a standard roll of this material is 14 m and width 40 cm (sometimes 90 cm). Surface on which are pasted wallpaper should be lined with cardboard or hardboard. Tag on self-adhesive wallpaper, just like paper - overlap.

Currently you can purchase a special wallpaper for painting. Drawing on this material is a deep relief. Wallpaper for painting is made of fiberglass, interlining and paper. Usually the material is white in color. When painting using water-emulsion paint.

Paper wallpaper for painting are water-repellent coating that allows them color up to seven times. Glue them back to back, the walls before work can not equalize. On the surface of wallpaper pattern is then applied with mastic or embossing technique.

Non-woven wallpaper have a fine structure, good camouflage flaws walls and have a high degree of sound insulation. When they adhered using ordinary wallpaper paste, but it does not inflict on the flag, but directly on the wall. Smooth the wallpaper using a rubber roller. Stain this material can be up to five times. The only drawback of such a cover - fragile: as a result of contact with the furniture, the top layer of wallpaper to cleave. But despite that, with proper operation of non-woven wallpaper will serve you long enough.

Steklooboi have a structured surface: here used drawing as a fir, cobwebs, burlap, netting and various geometric figures. Glass fiber is not broken, do not provide a good environment for the habitat of various microorganisms and well camouflage flaws surface. In addition, the glass does not accumulate static electricity and attract dust, and also a cover is easy to clean and has good moisture resistance (that is suitable for decorating bathrooms). Immediately prior to papering the walls covered with a latex primer, and after it dries stick wallpaper on a special adhesive. Promazyvayut them only the wall and wallpaper roll rubber roller. Wall tiles coated with a layer of glue to improve the adhesion of paint to the surface. For finishing used latex and acrylic paints. Cause their fur platen. Keep in mind: the denser the wallpaper, the more paint is needed on their coloration.